Platform pneumatic for sawing

Platform lifting and lowering is used in meat processing plants and

raises employee's line on the need for operations at height.

In the shop of the slaughter area can be applied on the operations of the hanging carcasses,zabelovsky, Kurashiki, otroki and cutting on the side. Also, depending on the technology, the platform can be applied to other operations in the process

meat processing. If for some operations the landing is only important for performance, then, for example, cut in half-carcasses the presence of the lifting and lowering platforms are directly related to safety.

Advantage of air platform is reliability and durability. Requires pneumatic compressor. Meets all European requirements for security and quality. Designed for the movement of workers in the line of slaughter. The pressure relief valve to stop the pad also located on the floor. The minimum pressure of the supply air, the platform must be at least 6 bar. The optimum range of air pressure is from 6 to 10 bar. Group work

load PN-ISO 4301-A2. The platform allows you to raise the worker from 1.25-2.5 MT., depending on the built-in pneumatic cylinder. The platform is actuated using pneumatic cylinders. The platforms is made entirely of stainless steel.

Specifications:

- the size of the working platform in order

- compressed air

- compressed air consumption 275дм3/cycle

- nominal pressure: 0.6 MPa

- lifting speed 6m / min

- lift height 1.25-2.5 MT

- Max. extension of the bath of 450 mm

- load 300 kg

two water connections 1⁄2

- service 1 employee